Verhuur artikelen

Verder winkelen Offerte aanvragen

€ {[item.price | number : 2]}
Prijsindicatie {[cartCtrl.days]} dagen
€ {[cartCtrl.rental_total | number : 2]}

Verkoop artikelen

€ {[item.price | number : 2]}
€ {[cartCtrl.sales_total | number : 2]}

winkelwagen leeg

Verder winkelen Offerte aanvragen

Wooden Camera EVF OLED MODIFICATION Blackmagic

Pre-order nog geen prijzen bekend
€ {[articleCtrl.article.price | number:2]} ex btw
€ {[articleCtrl.article.special_price | number:2]} ex btw € {[articleCtrl.article.price | number:2]}



The L bracket design attaches natively to the included UVF Mount v2 components and has 1/4-20 and 3/8-16 holes on the bottom as well as a 1/4-20 on the side

  • Included in the kit is a D-Tap to 4pin mini XLR cable measuring 24 inches long (61 cm) The Modification Kit's 4pin mini XLR power input accepts 12-24V
  • The UVF Mount system has three points of adjustment:
  • 15mm tube clamp for tilt and distance to the camera
  • NATO thumbscrew (identified by red component) for positioning on the NATO rail which is 5 inches (13cm)
  • Tension thumbscrew to adjust tilt of EVF. Tool-less design allows quick installation and removal of UVF v2 Sled and safety pin prevents accidental removalM.
  • The included 15mm Tube Clamp bolts directly to two 1/4-20 screw holes spaced between 25mm and 36mm center to center.